| |
Cyclus Chain whip which are used to hold the cassette so that the appropriate cassette lockring tool can loosen the locking for removal of the cassette from the freehub. Also used to separate threaded...» more info
|
FSA Headset Star fangle-Nut Driver and Guide Tool
Enables fast, accurate and aligned insertion of star fangle nuts into 1 1/8” fork steerer tubes....» more info
|
Shimano TL UN74 splined tool to fit Shimano splined cartridge bottom brackets and others including large spindle types
Large hexagonal nut for safe grip using a wrench
...» more info
|
Shimano Cable Cutters TL CT10 this shop quality cutter was designed to cut outer casings, cables and pinching end caps. It cleanly cuts braided or standard cables and features a center forming hole to...» more info
|
Shimano TL CN23 chain tool is recommended for use on all Shimano 10 speed chains. It is also compatible with 7, 8 and 9 speed chains.
Shimano's Uniglide, Hyperglide, and Interactive Glide chains h...» more info
|
Shimano TL-UN96 removal tool for XTR, Dura-Ace & very recent Ultegra, 105, XT, LX bottom brackets and "spiderless" outer chainring ('96 and newer XTR). (Also FC-M750, M739, M750, M569, MC40)...» more info
|
Shimano TL FC10 adaptor for removing crankarms from pipe-style bottom brackets with standard extractors. This plug fills the large threaded hole in an ISIS/Octalink bottom bracket spindle so that any...» more info
|
The Shimano TL-LR15 is a special tool for removing/installing the lockring on shimano cassettes and shimano disc brake rotors.
Stabilizing pin that helps stop slippage and keep tool squarely on the ...» more info
|
The ergonomic grip makes the Shimano TL CN27 so much easier to handle than more compact chain tools.
Shimano's Uniglide, Hyperglide, and Interactive Glide chains have links that 'bulge' out slightl...» more info
|
4 & 9mm hex wrench on one end and on the other, a peg spanner that fits two-pin crank dustcaps, freehub bolts, front chainwheel nuts, etc.
Designed for the removal and installation of Shimano chain...» more info
|
Shimano Crank Installation Tool TL FC16 spline tool used to install & adjust the lateral adjustment cap on Shimano XTR M960, XT-M760/761, Dura-Ace 7800, Ultegra 6600 & Saint FC-M800 HollowTech II Adju...» more info
|
Shimano TL-FC32 Bottom Bracket Tool is designed to remove and install Shimano Ultegra, Dura-Ace, Deore XT, and XTR Hollowtech II bottom brackets. Laser cut for a precise fit, one end of the TL-FC32 se...» more info
|
Shimano pedal SPD axle tool TL FC40 essential for the removal and installation of the locking sleeve that holds the axle on various Shimano Clipless pedals.
Removes locking collar from Shimano SPD ...» more info
|
Suntour freewheel two peg remover which Fits all Suntour four notch freewheels. Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without remova...» more info
|
Suntour freewheel four peg remover which Fits all Suntour four notch freewheels. Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without remov...» more info
|
Fork steerer cutter for 1” & 1 1/8” forks.
Fully adjustable and complete with spare cutting wheel in the handle and extendable file
...» more info
|
Shimano TL FC10 crank extractor A high quality, roller tip design, 22mm extractor and socket to fit 14mm Shimano, Stronglight and other cranks.
Two-part tool for extracting crank arms from tapered ...» more info
|
Lezyne Stainless 12 Multi-tool is lightweight, compact and stylish with high polished aluminium side plates. Engineered durability and designed versatility are exemplified by this Stainless 12 multi t...» more info
|