Campagnolo Record FC7-RE593C 2007/08 Carbon 10 Speed Ultra Torque Chainset 175mm 39/53

Campagnolo
SKU:
FC7-RE593C
Kr4,840.85
(No reviews yet)
Width:
23.00 (cm)
Height:
31.00 (cm)
Depth:
23.00 (cm)
Current Stock:
Adding to cart… The item has been added

Campagnolo Record FC7-RE593C Carbon 10 Speed Ultra Torque Chainset 175mm 39/53 

The oversize axle system with outer cups is combined with a carbon fibre structure which is completely hollow internally

Not only is the main crank arm hollow, but also the small arms supporting the chainrings of the RH crank.

Campagnolo Record Ultra-Torque Chainset Ultra-Hollow composite crankarms

Light alloy fixing bolts and nuts Ultra·Drive EPS chainrings with antifriction treatment Integrated ULTRA-TORQUE semi-axles

Requires ULTRA-TORQUE BB overboard cups.

Crank lengh : 175mm 

Chainrings : 39/53

LIGHTNESS, RIGIDITY, SIMPLIFIED ASSEMBLY AND MAINTENANCE:   ULTRA-TORQUE™.

THIS IS CAMPAGNOLO'S ANSWER IN THE INTEGRATED CRANKSET SECTOR.

AFTER MORE THAN 10 YEARS SINCE ITS INTRODUCTION THE ULTRA-TORQUE™ SYSTEM, IT IS STILL CONSIDERED, THE BEST PERFORMING CRANK-SET SPINDLE IN TERMS OF STIFFNESS, LOW WEIGHT AND EFFICIENCY OF POWER TRANSMISSION.

Campagnolo found a way to permanently conjoin the semi-axles of the bottom bracket to the respective crankset arms. This redesign made it possible to considerably reduce the lateral dimensions at the axle level and prevent annoying contact with the ankles when turning the pedals.

Assembly is simplistic: one single oversize bolt is enough to integrate the two semi-axles. With regard to torque transmission efficiency, this system is equally as effective as a single piece axle.

Furthermore, despite the narrow side profile, we have been able to position the bearings outside the bottom bracket shell, resulting in greater axle rigidity from the increased axle diameter. This breakthrough was obtained by using an ingenious mechanical system derived from many years' motoring experience in the rotation axle and engine shaft coupling sector: the Hirth joint.

In short , this is a joint with self-centring and self-aligning frontal teeth located in the middle of the bottom-bracket
axle where the ends of the semi-axles, integrated with the crankset arms, come into contact.

Campagnolo Code : FC7-RE593C